2oz multi layer pcb διαδικτυακή κατασκευή

Rogers RO4360 High Frequency PCB 60mil Double Sided Radio Frequency Circuit With Immersion Gold for Ground-based Radar (Printed Circuit Boards are custom-made products, the picture and parameters shown are just ... Διαβάστε περισσότερα

Low Loss Printed Circuit Board (PCB) on TU-883 Substrate and TU-883P Prepreg Multi-layer TU-883 PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) ... Διαβάστε περισσότερα

Double Layer Rogers PCB Built on 12.7mil RO4003C LoPro Reverse Treated Foil for High Speed Back Planes. (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) ... Διαβάστε περισσότερα

This 16-layer PCB is fabricated using S1000-2M laminate (TG 180°C) with 3oz heavy copper per layer, achieving a pressed thickness of 6.7mm. It features Lead-Free Hot Air Solder Leveling (HASL) surface finish, ... Διαβάστε περισσότερα

Introduction RO3206 high frequency circuit materials are laminates that contain ceramic fillers and are reinforced with woven fiberglass. These materials have been specifically engineered to provide exceptional ... Διαβάστε περισσότερα

Introduction Rogers RO4830 high frequency laminates are thermoset materials that offer a reliable and cost-effective alternative to conventional PTFE-based laminates. They are particularly well-suited for ... Διαβάστε περισσότερα

Brief Introduction TB-73 high-temperature resistant and high-frequency Polyimide copper-clad laminates are designed to withstand high temperatures and high frequencies. They are used in the manufacture of ... Διαβάστε περισσότερα

Rogers DiClad 870 Woven Fiberglass Reinforced PTFE-based 31mil 93mil 125mil Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General ... Διαβάστε περισσότερα

F4B High Frequency PCB Built on 2oz Copper 1.6mm PTFE With Immersion Gold for Power Dividers (PCB's are custom-made products, the picture and parameters shown are just for reference) Polytetrafluoroethylene ... Διαβάστε περισσότερα

PTFE High Frequency PCB Built on 2oz Copper 3.0mm F4B DK2.2 for Radio Systems (PCB's are custom-made products, the picture and parameters shown are just for reference) Polytetrafluoroethylene (Short for PTFE), ... Διαβάστε περισσότερα